Express 2500 V8-6.6L DSL Turbo (2010)
4. Install the turbocharger coolant return to the pipe retainer bolt (1) onto the right front valve cover.
Tighten the bolt to 25 Nm (18 lb ft).
5. Install the turbocharger coolant return pipe retainer bolt (1).
Tighten the bolt to 25 Nm (18 lb ft).
6. Install the turbocharger. Refer to Turbocharger Replacement (See: Service and Repair/Turbocharger Replacement)
7. Install the EGR cooler assembly. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: Emission Control Systems/Exhaust Gas
Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Valve Cooler Replacement).
8. Install the generator mounting bracket. Refer to Generator Bracket Replacement (V8) (See: Starting and Charging/Charging
System/Alternator/Service and Repair/Generator Bracket Replacement)Generator Bracket Replacement (V6) (See: Starting and
Charging/Charging System/Alternator/Service and Repair/Generator Bracket Replacement)Generator Bracket Replacement (LMM) (See:
Starting and Charging/Charging System/Alternator/Service and Repair/Generator Bracket Replacement)Generator Bracket Replacement (LGH) (
See: Starting and Charging/Charging System/Alternator/Service and Repair/Generator Bracket Replacement).
9. Install the cooling fan clutch. Refer to Fan Clutch Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Fan
