Express 2500 V8-6.6L DSL Turbo (2010)
2. Connect the FRT sensor electrical connector.
3. Install the fuel line retainer center of engine.
4. Install the rear fuel line retainer.
5. Install the charged air inlet tube. Refer to Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet) (See: Fuel Delivery and Air
Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet)) Charge Air
Cooler Inlet and Outlet Duct Replacement (Outlet) (See: Fuel Delivery and Air Induction/Turbocharger/Intercooler/Intercooler Duct/Service and
Repair/Charge Air Cooler Inlet and Outlet Duct Replacement (Outlet))
6. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair/Glow Plug Control Module Replacement).
7. Prime the fuel system. Refer to Fuel System Priming (See: Fuel Delivery and Air Induction/Service and Repair/Fuel System Priming).
8. Once engine starts, inspect for leaks.
9. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
