Express 2500 V8-6.6L DSL Turbo (2010)
or equivalent.
2. Position and install the exhaust differential pressure sensor pipe assembly.
3. Loosely install the exhaust differential pressure sensor bracket bolts (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the exhaust differential pressure sensor pipe assembly fittings (2).
1. Tighten the exhaust differential pressure sensor pipe fittings to 45 Nm (33 lb ft).
2. Tighten the exhaust differential pressure sensor bracket bolts to 9 Nm (80 lb in).
5. Install the exhaust differential pressure sensor pipe assembly hoses to the sensor.
6. Position the exhaust differential pressure sensor pipe assembly hose clamps (3).
7. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
