Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the auxiliary battery negative cable to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Connect the auxiliary negative ground terminal bolt (1) to the frame and tighten to 10 Nm (89 lb in).
3. Connect the auxiliary battery negative cable (2) to the auxiliary battery and tighten to 14 Nm (123 in lb).
VIN 6
Auxiliary Battery Negative Cable Replacement (LGH,LMM)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the auxiliary battery negative cable from the auxiliary battery. Refer to Battery Negative Cable Disconnection and Connection (See:
Battery Negative Cable Disconnection and Connection).