Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the battery tray to the vehicle.
2. Connect the vacuum pump hoses and electrical connector.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the battery tray bolts and tighten to 9 Nm (80 lb in).
4. Install the battery.
5. Install the battery hold-down retainer and bolt and tighten to 18 Nm (12 lb ft).
6. Install the fender brace.
7. Install the battery limiter to the vehicle if equipped.
