Express 2500 V8-6.6L DSL Turbo (2010)
4. Install the engine harness retainer bracket and nut (1). Tighten to 25 Nm (17 lb ft).
5. Install the engine harness ground terminal (2) and bolt (3). Tighten to 25 Nm (17 lb ft).
6. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Drive Belt Tensioner/Service and Repair).
7. Install the generator. Refer to Generator Replacement (V6) (See: Generator Replacement)Generator Replacement (V8) (See: Generator
Replacement)Generator Replacement (LMM) (See: Generator Replacement)Generator Replacement (LGH) (See: Generator Replacement).
8. Install the fan assembly. Refer to Fan Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service and
Repair/Fan Replacement).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Negative/Service
and Repair/Battery Negative Cable Disconnection and Connection).
VIN 6
Generator Bracket Replacement (LMM)
Removal Procedure