Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the drain plug and tighten to 33 Nm (24 lb ft).
2. Fill the rear drive axle.
*
Use the proper fluid, refer to Approximate Fluid Capacities (See: Maintenance/Specifications).
*
For the proper capacity, refer to Fluid and Lubricant Recommendations (USA and Canada) (See: Maintenance).
3. Install the fill plug and tighten to 33 Nm (24 lb ft).
4. Remove the support and lower the vehicle.
Differential Oil Replacement (10.5 Inch Axle)
Differential Oil Replacement (10.5 Inch Axle)
Removal Procedure
