Express 2500 V8-6.6L DSL Turbo (2010)
3. Install the wiper transmission assembly to the plenum.
4. Install the 4 bolts and tighten to 8 Nm (71 lb in).
5. Connect the electrical connector to the wiper motor.
6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and
Repair).
7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper Arm/Service and Repair).
8. Operate the wipers and inspect for proper operation.