Express 2500 V8-6.6L DSL Turbo (2010)
Wiper Motor: Service and Repair
Windshield Wiper Motor Replacement
Windshield Wiper Motor Replacement
Special Tools
*
J 39232 Wiper Transmission Separator
*
J 39529 Wiper Transmission Installer
Removal Procedure
1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper Arm/Service and Repair).
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and
Repair).
3. Remove the wiper transmission. Refer to Windshield Wiper Transmission Replacement (See: Wiper Gear Box/Service and Repair).
4. Remove the 2 bolts retaining the wiper motor.
5. Remove the wiper motor from the wiper transmission.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the wiper motor onto the wiper transmission with the 2 bolts and tighten to 8 Nm (71 lb in).