Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
1. Install the seat belt buckle pretensioner to the seat.
2. Connect the electrical connector to the seat belt buckle pretensioner, if equipped.
3. Lift the buckle cover.
Notice: Refer to Fastener Notice.
4. Install the seat belt buckle pretensioner retaining bolt to the seat.
Tighten the seat belt buckle pretensioner retaining bolt to 52 N.m (38 lb ft).
5. Enable the SIR system. Refer to SIR Disabling and Enabling.
