Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the upper fender support bar.
3. Remove the bolt from the washer solvent container.
4. Lift the washer solvent container up enough pass the horns in order to access the washer hose and the electrical connector.
5. Disconnect the electrical connector from the washer pump.
6. Disconnect the washer hose from the washer pump.
7. Remove the washer solvent container from the vehicle.
8. Drain the washer solvent reservoir into a suitable container.
9. Remove the washer pump from the washer solvent container.
10. Remove the washer solvent container cap.
INSTALLATION PROCEDURE
1. Install the washer pump to the new washer solvent container.
2. Install the washer solvent container cap.
