Express 2500 2WD V8-4.8L VIN V (2004)
Cruise Control Servo Cable: Service and Repair
CRUISE CONTROL CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood
2. Remove the air cleaner assembly.
3. Remove the cruise control cable end from the throttle linkage.
Use a suitable tool to lightly pry off the end of the cruise control cable end from the throttle linkage.
4. Disconnect the cruise control cable from the cable bracket by squeezing the retaining tabs on the cable.
5. Disconnect the cruise cable from the retaining clip on the fan shroud.
6. Squeeze the retaining tabs on the cruise control cable fitting to expose the cable bead and the buckle of the ribbon.
IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly.