Express 2500 2WD V8-4.8L VIN V (2004)
Cooling System Air Bleeder Pipe / Hose: Service and Repair
Coolant Air Bleed Hose Replacement
Coolant Air Bleed Hose Replacement (4.8L, 5.3L, and 6.0L Engines)
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the generator.
3. Partially drain the cooling system.
4. Reposition the coolant air bleed hose clamp at the throttle body.
5. Remove the coolant air bleed hose from the throttle body.
6. Position the coolant air bleed hose clamp at the pipe.
7. Remove the coolant air bleed hose (1) from the pipe (2).
Installation Procedure