Express 2500 2WD V8-4.8L VIN V (2004)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Auxiliary
AIR TEMPERATURE ACTUATOR REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the left rear quarter trim panel.
2. Disconnect the electrical connector from the air temperature actuator.
3. Remove the retaining screws from the air temperature actuator.
4. Remove the air temperature actuator.
INSTALLATION PROCEDURE
1. Install the air temperature actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws to the air temperature actuator.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the air temperature electrical connector to the actuator.
4. Install the left rear quarter trim panel.