Express 2500 2WD V8-4.8L VIN V (2004)
Air Register: Service and Repair
Defroster Duct Replacement - Windshield
DEFROSTER DUCT REPLACEMENT - WINDSHIELD
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the I/P carrier.
3. Remove the windshield defrost duct retaining screws at the heater case.
4. Remove the windshield defrost duct retaining nuts at the cowl.
5. Remove the windshield defrost duct (5) from the vehicle.
INSTALLATION PROCEDURE
1. Install the windshield defrost duct (5) to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the windshield defrost duct retaining nuts to the cowl.
Tighten
Tighten the nuts to 4 N.m (35 lb in).
3. Install the windshield defrost duct retaining screws to the heater case.
Tighten
Tighten the screws to 4 N.m (35 lb in).