Express 2500 2WD V8-4.8L VIN V (2004)
6. Remove the auxiliary evaporator tube (1) retaining nuts (2) from the body.
7. Remove the bolt retaining the auxiliary evaporator outlet tube to the transmission bracket.
8. Remove the auxiliary evaporator outlet tube from the auxiliary evaporator.
9. Remove the evaporator tube from the vehicle.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Connect the evaporator tube (1) to the auxiliary evaporator core.
Tighten
Tighten the hose fitting to 48 N.m (35 lb ft).
2. Install the evaporator tube retaining nuts (2) to the engine and the body.
Tighten
Tighten the retaining nuts to 6 N.m (53 lb in).
