chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Brake Booster Inlet Hose Replacement|Page 1526 > < Power Brake Booster Inlet Hose Replacement|Page 1524
Page 5
background image

1. Notice:  Refer to Fastener Notice in Service Precautions.

Route the hose in the same position the hose occupied prior to removal.

2. Install the reservoir inlet hose (3) to the reservoir.
3. Install the reservoir inlet hose (3) to the power brake booster (2).
4. Bleed the power steering system. Refer to Bleeding the Power Steering System.
5. Remove the drain pan from under the vehicle.

Power Steering Reservoir Outlet Pipe/Hose Replacement

Power Steering Reservoir Outlet Pipe/Hose Replacement

Removal Procedure

1. Notice:  Refer to Power Steering Hose Disconnected Notice in Service Precautions.

Siphon the power steering fluid from the reservoir. 

2. Disconnect the power steering reservoir outlet hose from the power steering pump.
3. Disconnect the power steering reservoir outlet hose from the power steering gear remote reservoir.
4. Remove the power steering reservoir outlet hose from the vehicle.

Installation Procedure

1. Install the power steering reservoir outlet hose to the vehicle
2. Install the power steering reservoir outlet hose to the power steering pump.
3. Install the power steering reservoir outlet hose to the power steering gear remote reservoir.
4. Bleed the power steering system.

Power Brake Booster Inlet Hose Replacement|Page 1526 > < Power Brake Booster Inlet Hose Replacement|Page 1524