Express 2500 2WD V8-4.8L VIN V (2004)
1. Align the inner and outer knee bolster brackets (2) to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts (1).
Tighten
Tighten the nuts to 10 N.m (88 lb in).
3. Install the knee bolster (1) to the knee bolster brackets.
4. Install the nuts (2).
Tighten
Tighten the nuts to 10 N.m (88 lb in).
5. Install the knee bolster trim panel.