Express 2500 2WD V8-4.8L VIN V (2004)
Install the power brake booster inlet hose (1) to the power brake booster (2).
-
Tighten the hose fitting to 33 Nm (24 ft. lbs.).
3. Raise the vehicle.
4. Install the power brake booster inlet hose (2) to the power steering pump (1) through the wheelwell.
-
Tighten the hose fitting to 33 Nm (24 ft. lbs.).
5. Install the tire and wheel.
6. Lower the vehicle.
7. Bleed the power steering system.
8. Remove the drain pan from under the vehicle.