Express 2500 2WD V8-4.8L VIN V (2004)
8. On axles with a locking differential, use a screwdriver, or a similar tool, in order to enter the differential case and rotate the rear axle shaft lock (1)
until the lock aligns with the thrust block opening (2).
9. Push the flange of the axle shaft into the axle housing.
10. Remove the rear axle shaft lock from the button end of the axle shaft.
Important: When removing the axle shaft, do not rotate the shaft. Rotating the shaft will misalign the gears. Misaligning the gears will make assembly
difficult.
11. Remove the axle shaft from the housing.
Installation Procedure
