Express 3/4 Ton Van V8-4.8L VIN V (2003)
Trunk / Liftgate Shock / Support: Service and Repair
Cargo Door Assist Rod Replacement
Removal Procedure
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or
personal injury.
1. Open and support the cargo door.
Notice: Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.
2. Using a flat bladed tool pry the retainer clip away from the ball stud socket.
3. Remove the upper end of the assist rods from the ball stud.
4. Remove the lower end of the assist rods from the ball stud.
5. Remove the assist rods from the cargo door.
6. Remove ball stud bolts.
7. Remove ball stud bracket.
Installation Procedure
1. Position the assist rods to the cargo door.
