Chevrolet Workshop Manuals
Express 3/4 Ton Van V8-4.8L VIN V (2003)
Power and Ground Distribution > Auxiliary Power Outlet > Component Information > Diagrams > Diagram Information and Instructions > Page 6476
8. Center the crimp tool over the splice clip and wires.
Ensure that no strands of wire are cut.
10. Crimp the splice on each end (2).
11. Apply 60/40 rosin core solder to the opening in the back of the clip. Follow the manufacturer's instructions for the solder equipment.
|[PREV PAGE] [NEXT PAGE]|