chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Hose/Pipes Replacement|Page 3644 > < Fuel Hose/Pipes Replacement|Page 3642
Page 3
background image

5. Disconnect the fuel feed pipe at the fuel filter.
6. Disconnect the chassis fuel return pipe (4) at the rear fuel return pipe (2).

7. Remove the fuel pipe retaining clips (1).
8. Remove the fuel feed and return pipes.

INSTALLATION PROCEDURE

1. Install the fuel feed and return pipes and the fuel pipe retaining clips (1).

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 12 N.m (106 lb in).

2. Connect the chassis fuel return pipe to the rear fuel return pipe.
3. Connect the fuel feed pipe to the fuel filter.
4. Install the fuel tank. 
5. Lower the vehicle.
6. Refill the fuel tank.
7. Tighten the fuel filler cap.

Fuel Hose/Pipes Replacement|Page 3644 > < Fuel Hose/Pipes Replacement|Page 3642