Express 3/4 Ton Van V8-4.8L VIN V (2003)
7. Remove the seat belt retractor from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor retaining bolt to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat belt retractor retaining bolt to 52 N.m (38 lb ft).
3. Install the seat belt guide to the vehicle.
4. Install the seat belt guide retaining bolt to the vehicle.
Tighten
Tighten the seat belt guide retaining bolt to 52 N.m (38 lb ft).
5. Install the body side trim panel.
