Express 3/4 Ton Van V8-4.8L VIN V (2003)
Notice: Refer to Fastener Notice in Service Precautions.
10. Adjust the caster and the camber angle by turning the cam bolts until the specifications have been met.
When the adjustments are complete, hold the cam bolt head in order to ensure the cam bolt position does not change while tightening the nut.
-
Tighten the upper control arm nuts to 175 Nm (129 ft. lbs.).
11. Verify that the caster and the camber are still within specifications.
When the caster and camber are within specifications, adjust the toe.
Front Toe Adjustment
1. Loosen the jam nut on the tie rod (2).
2. Rotate the inner tie rod (1) to the required toe specification setting.
Notice: Refer to Fastener Notice in Service Precautions.
3. Tighten the jam nut on the tie rod.
-
Tighten the tie rod jam to 68 Nm (50 ft. lbs.).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
