chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Steering Pulley Replacement|Page 7158 > < Power Steering Pulley Replacement|Page 7156
Page 1
background image

Power Steering Pump: Service and Repair
Power Steering Pump Replacement

Power Steering Pump Replacement 

Removal Procedure 
1. Place a drain pan below under the vehicle.
2. Remove the power steering pump pulley. 

3. Remove the lower intermediate shaft bolt to the power steering gear retaining bolt.
4. Disconnect the lower intermediate shaft from the power steering gear.
5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Remove the tire and wheel. 

7. Disconnect the reservoir outlet hose from the power steering pump through the wheel well.

Power Steering Pulley Replacement|Page 7158 > < Power Steering Pulley Replacement|Page 7156