Express 3/4 Ton Van V8-4.8L VIN V (2003)
7. Raise the vehicle.
Important: Route the power steering hoses in the same location in which they were removed.
8. Install the power brake booster inlet hose (2) to the power steering pump through the wheel well.
Tighten the hose fitting to 33 Nm (24 ft. lbs.).
9. Install the power steering gear outlet hose to the power steering pump through the wheel well.
10. Install the reservoir outlet hose to the power steering pump through the wheel well.
11. Remove the tire and wheel.
12. Lower the vehicle.