Express 3/4 Ton Van V8-5.7L VIN R (1998)
4. Remove the rear brake rear pipe from the vehicle.
INSTALLATION PROCEDURE
CAUTION: Always use double-walled steel brake pipe when replacing brake pipes. The use of any other pipe is not recommended and may cause
brake system failure. Carefully route and retain replacement brake pipes. Always use the correct fasteners and in the original location for replacement
brake pipes. Failure to properly route and retain brake pipes may cause damage to the brake pipes and brake system failure.
1. Install the rear brake rear pipe to the vehicle.
2. Install the brake pipe retainers to the frame.
3. Connect the rear brake rear pipe to the rear brake hose.
-
Tighten the rear brake rear pipe to the rear brake hose to 17 Nm (13 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Connect the rear brake front pipe to the rear brake rear pipe at the brass fitting.