Express 3/4 Ton Van V8-5.7L VIN R (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement (Vacuum Brake Booster)
REMOVAL PROCEDURE
1. Apply the parking brake.
2. Remove the brake pipes from the brake master cylinder.
3. Plug the brake pipes in order to prevent brake fluid contamination.
4. Remove the nuts that secure the brake master cylinder to the vacuum power brake booster.
5. Remove the brake master cylinder from the vacuum power brake booster.
INSTALLATION PROCEDURE
Before you install the master cylinder, bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding.
1. Install the brake master cylinder to the vacuum power brake booster.
2. Install the brake master cylinder nuts.
-
Tighten the brake master cylinder nuts to 36 Nm (27 ft. lbs.).
