chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Cooling System|Testing and Inspection > < Cooling System|Capacity Specifications|Page 2853
Page 1
background image

Coolant: Description and Operation

NOTICE:  Do not use a solution stronger than 70 percent antifreeze. Pure antifreeze will freeze at -22°C (-8°F).

This vehicle was manufactured with GM Goodwrench DEX-COOL. DEX-COOL was developed to last for 24000 km (150,000 miles) or 5 years
(whichever occurs first). Make sure only GM Goodwrench DEX-COOL is used when coolant is added or changed. Follow the instructions in Draining
and Filling Cooling System in Engine Cooling. 
A 50/50 mixture of ethylene glycol (DEX-COOL) and water will provied the following:
^

Give freezing protection down to -37°C (-35°F) 

^

Give boiling protection up to 129°C (265°F) 

^

Protect against rust and corrosion

^

Help keep the proper engine temperature

^

Allow the sensors and switched operate as designed.

ENGINE COOLANT RECYCLING 

^

Tools Required
-

GM approved Recycling System such as Pro Clean (Available in the GM Dealer Equipment Program)

Whenever the cooling system needs maintenance or repairs, remove and replace the coolant with qualified new coolant.
If you only drain the radiator, up to 50 percent of the used, contaminated coolant can remain in the cooling system.
Use any of the following methods in order to remove the coolant:
^

Use a waterless coolant evacuation system, available in the GM Dealer Equipment program , or equivalent, that removes the used coolant.

^

Recover the used coolant. Store the coolant in a used coolant holding tank. Submit the used coolant for recycling on a regular basis.

IMPORTANT:  Do not recycle coolant on vehicles manufactured with GM Goodwrench Dex-Cool.

Cooling System|Testing and Inspection > < Cooling System|Capacity Specifications|Page 2853