Express 3/4 Ton Van V8-5.7L VIN R (1998)
1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation under Engine Unit Repair.
2. Install the crankshaft pulley and the three bolts finger tight.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the crankshaft balancer bolt finger tight.
3.1. Tighten the pulley bolts to 58 Nm (43 ft. lbs.).
3.2. Tighten the crankshaft balancer bolt to 100 Nm (74 ft. lbs.).
4. Install the drive belt.
5. Install the fan shroud assembly.
6. Connect the battery negative cable.
