Express 3/4 Ton Van V8-5.7L VIN R (1998)
29. Install the water outlet.
30
Install the water outlet studs.
Tighten
Tighten the water outlet studs to 25 Nm (18 lb ft).
31. Install a NEW throttle body gasket into the groove in the upper intake manifold.
32. Install the throttle body onto the upper intake manifold.
33. If reusing the fasteners, apply threadlock GM P/N United States 12345382, GM P/N Canada 10953489, or equivalent, to the threads of the throttle
body attaching studs.
34. Install the throttle body attaching studs.
Tighten
Tighten the throttle body attaching studs to 9 Nm (80 lb in).
35. Install the accelerator control bracket, the bolt, and the nut.
Tighten
Tighten the accelerator control bracket bolt and the nut to 12 Nm (106 lb in).
