Express 3/4 Ton Van V8-5.7L VIN R (1998)
Without Auxiliary Springs **:
Service Checking ................................................................................................................................ 107.95 mm +/- 13 mm (4.25 inch +/- 0.5 inch)
Service Setting .................................................................................................................................... 107.95 mm +/- 13 mm (4.25 inch +/- 0.5 inch)
Side To Side Tolerance ............................................................................................................................................................... 13 mm +/- (0.5 inch)
Z Measurement
* Measure the Z height:
1. Using straightedge, locate bottom flange of control arm (inside edge of ball joint) (5) and level to the straight edge horizontally.
2. Using a measuring device, locate the center of the bolt (3) of the lower control arm (2) and measure to the straight edge.
3. Record the reading.
D Measurement
** Measure D height by measuring the distance between the rear axle and the jounce bumper.