chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployment Procedures|Page 10192 > < Deployment Procedures|Page 10190
Page 2
background image

2. Rotate the steering wheel so that the side of the SIR module is at the 12 o'clock position. 

3. Insert a screwdriver into one of the four holes on the back of the steering wheel. 

4. Pull the screwdriver handle away from the steering column to release the leaf spring from the notched pin. 
5. Repeat the steps mentioned above for the other three attached locations.

Deployment Procedures|Page 10192 > < Deployment Procedures|Page 10190