chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wheel Cylinder > < Brakes - Lead/Pull & Front Brake Wear|Page 5209
Page 2
background image

2. Install the rear brake shoes (1 and 14).
3. Install the rear brake shoe adjuster (12).

IMPORTANT:  Do not interchange the right and left brake shoe adjusting screws.

4. Install the rear brake shoe adjuster spring (13). The coils of the adjusting screw spring must not touch the adjusting screw.
5. Install the rear parking brake lever strut (4) and spring (2).
6. Install the rear brake shoe actuator link (6).
7. Install the rear brake shoe actuator (11) and spring (10).
8. Install the shoe guide (3).
9. Install the hold-down pins (15).

10. Install the hold-down springs (9).
11. Install the rear brake shoe return springs (7 and 8).
12. Install the rear brake drum to the vehicle. 
13. Remove the pin to the park brake lever. 
14. Install the tire and the wheel.
15. Adjust the rear brakes. 
16. Adjust the parking brake. 
17. Remove the safety stands. Lower the vehicle.

Wheel Cylinder > < Brakes - Lead/Pull & Front Brake Wear|Page 5209