Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
4. Install the retaining bolt and bracket of the front brake hose to the upper control arm.
^
Tighten the retaining bolt of the front brake hose bracket to the upper control arm to 20 Nm (15 ft. lbs.).
5. Install the retaining nut and retaining clip to the front brake hose.
IMPORTANT: Make sure the brake hose is not twisted. Make sure the brake hose is not in contact with any suspension components.
6. Connect the front brake pipe to the front brake hose.
^
Tighten the front brake pipe to the front brake hose to 20 Nm (15 ft. lbs.).
7. Bleed the brake hydraulic system.
8. Install the tires and wheels on the vehicle.
Brake Hose Replacement - Rear (8 1/2 and 9 1/2 Inch Ring Gear)
