Express 3500 V8-6.6L DSL Turbo (2008)
Exhaust Pipe: Service and Repair
Turbocharger Exhaust Pipe Replacement (6.6L (LMM))
Turbocharger Exhaust Pipe Replacement (6.6L (LMM))
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement .
2. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Cooling System/Service and Repair)Cooling System
Draining and Filling (Vac N Fill) (See: Cooling System/Service and Repair) .
3. Remove the exhaust gas recirculation (EGR) cooler pipe bolt.
4. Remove the transmission fluid fill tube to bell housing nut.
5. Position the transmission fill tube aside. The tube does not require removal from the transmission.
6. Reposition the EGR cooler pipe clamp (1) and remove the EGR cooler pipe hose from the EGR cooler tube.