Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Express 3500 V8-6.6L DSL Turbo (2008)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Service and Repair

Page 1
background image

Keyless Entry Module: Service and Repair

Remote Control Door Lock Receiver Replacement

Removal Procedure

1. Remove the instrument panel (I/P) upper trim panel.
2. Disconnect the electrical connector (2) from the door lock receiver (1).
3. Disengage the remote control door lock receiver (1) from the door lock receiver bracket.
4. Remove the door lock receiver.

Installation Procedure

1. Perform the following to install the door lock receiver (1) to the door lock receiver bracket.

Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.

2. Connect the electrical connector (1) to the door lock receiver (2).
3. Install the I/P trim panel.
4. Refer to Programming and Relearning. See: Testing and Inspection/Programming and Relearning

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]