Express 3500 V8-6.6L DSL Turbo (2008)
5. Remove the glow plug control module bolts (1).
6. Remove the glow plug control module (2).
7. Remove the glow plug control module bracket bolts (3), if required.
8. Remove the glow plug control module bracket (4), if required.
Installation Procedure
1. Position the glow plug control module bracket (4), if required.
Notice: Refer to Fastener Notice.
2. Install the glow plug control module bracket bolts (3), if required.
Tighten the bolts to 10 N.m (89 lb in).
3. Position the glow plug control module (2).
4. Install the glow plug control module bolts (1).
