Express 4500 V8-6.0L (2010)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
Removal Procedure
1. Raise and support the hood.
2. Disconnect the electrical connector for the underhood lamp.
3. Remove the underhood lamp harness and the retainers from the hood. Refer to Underhood Lamp Replacement (See: Lighting and
Horns/Underhood Lamp/Service and Repair).
4. Remove the hood insulator retainers.
5. Remove the insulator from the hood (1).
Installation Procedure
1. Install the insulator (2) to the hood (1).
2. Install the hood insulator retainers.
3. Install the retainers holding the underhood lamp and harness to the hood. Refer to Underhood Lamp Replacement (See: Lighting and
Horns/Underhood Lamp/Service and Repair).
4. Connect the electrical connector to the underhood lamp.
5. Close the hood.