Left Body Rear Corner Trim Panel Replacement
2. Remove the hinge pillar trim from the vehicle.
3. Inspect the hinge pillar trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the hinge pillar trim panel to the vehicle.
2. Align the locator pins. Press on the hinge pillar trim panel in order to engage the retaining clips.
Body Rear Corner Garnish Molding Replacement
Body Rear Corner Garnish Molding Replacement
Removal Procedure
1. Remove the rear passenger seats when needed. Refer to Rear Bench Seat Replacement (See: Seats/Service and Repair/Rear Bench Seat
Replacement).
2. Remove the passenger side rear corner trim panel, for the passenger side of the vehicle only. Refer to Body Rear Corner Trim Panel Replacement -
Right Side (See: Body Rear Corner Trim Panel Replacement - Right Side).
3. Pull down on the upper corners of the garnish molding (1) in order to disengage the retaining clips.
4. Pull in order to disengage the remaining retaining clips.
5. Remove the rear corner garnish molding (1) from the vehicle.
6. Inspect the rear corner garnish molding (1) for broken or missing clips. Replace the clips as needed.
Installation Procedure
