Express 4500 V8-60L (2010) Rear Door Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Body Rear Corner Garnish Molding Replacement).
2. Remove the driver side body side rear trim panel. Refer to Body Side Trim Panel Replacement - Left Side (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Body Side Trim Panel Replacement - Left Side).
3. Remove the passenger side rear corner trim panel. Refer to Rear Door Upper Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Rear Door Upper Garnish Molding Replacement).
4. Remove the rear floor trim plate. Refer to Rear Floor Trim Plate Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Rear Floor Trim Plate Replacement).
5. Remove the rear door opening frame garnish molding. Refer to Rear Door Upper Garnish Molding Replacement (See: Interior Moulding /
Trim/Trim Panel/Service and Repair/Rear Door Upper Garnish Molding Replacement).
6. Pull the rear door opening weatherstrip from the door opening pinch-weld flange. Use 3M Release Agent or the equivalent at the bottom ends of
the rear door opening weatherstrip if needed.
Installation Procedure