Express 4500 V8-6.0L (2010)
6. Position a large C-clamp against the outboard disc brake pad backing plate and over the rear of the brake caliper body.
7. Using the C-clamp, slowly and evenly bottom the brake caliper pistons into the brake caliper bores.
8. Remove the brake hose fitting bolt (1).
Note: Do not reuse the brake hose fitting gaskets.
9. Remove and discard the brake hose fitting gaskets (2) from the brake hose (3).
Cap the brake hose fitting to prevent brake fluid loss and contamination.
10. Remove the brake caliper bracket bolts (1).
11. Remove the brake caliper and bracket assembly.
