Express 4500 V8-6.0L (2010)
11. Remove the valve rocker arm cover bolts.
12. Remove the valve rocker arm cover.
13. Remove the gasket (1) from the rocker cover.
14. Discard the OLD gasket.
Installation Procedure
Note:
*
All gasket surfaces should be free of oil or other foreign material during assembly.
*
DO NOT reuse the valve rocker arm cover gasket.
*
The valve rocker arm cover bolt grommets may be reused.
1. Install a NEW rocker cover gasket (1) into the valve rocker arm cover.