Express 4500 V8-6.0L (2010)
5. Install the EVAP purge solenoid (3), isolator (1), and bolt (2) to the intake manifold. Tighten the EVAP purge solenoid bolt to 10 Nm (89 lb in).
6. Install the EVAP purge solenoid vent tube to the solenoid (1) and vapor pipe.
7. Install the engine coolant air bleed clamp and hose to the throttle body, if applicable.
8. Lubricate the MAP sensor grommet (715) with clean engine oil.
9. Install the grommet onto the MAP sensor (714).
10. Install the MAP sensor (714) and the retainer (736).
