Express 4500 V8-6.0L (2010)
Body Control Module: Service and Repair
Body Control Module Replacement
Removal Procedure
1. Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Passenger Knee Bolster Replacement).
2. Disconnect the electrical connectors (2) from the body control module (BCM) (1).
3. Release the tabs (2) retaining the BCM (1) to the bracket.
4. Remove the BCM (1) from the vehicle.
Installation Procedure