Express 4500 V8-6.0L (2010)
1. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Rear Corner Garnish Molding Replacement).
2. Remove the seat belt retractor bolts (1).
3. Remove the seat belt retractor from the vehicle.
Installation Procedure
1. Install the seat belt retractor to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the seat belt retractor bolts (1) and tighten to 52 Nm (38 lb ft).
3. Install the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Rear Corner Garnish Molding Replacement).
