Express 4500 V8-6.0L (2010)
Alignment: Service and Repair
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
1. Loosen the jam nut on the tie rod (2).
2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications (See: Specifications/Wheel
Alignment Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the jam nut on the tie rod to 68 Nm (50 lb ft).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
