Express 4500 V8-6.0L (2010)
3. Install a new pitman arm washer and nut and tighten to 250 Nm (184 lb ft).
4. Remove the power steering gear from the vise.
5. Install the power steering gear. Refer to Steering Gear Replacement (Rack and Pinion) (See: Steering Gear/Service and Repair/Steering Gear
Replacement (Rack and Pinion))Steering Gear Replacement (Non-Rack and Pinion) (See: Steering Gear/Service and Repair/Steering Gear
Replacement (Non-Rack and Pinion)).
6. Lower the vehicle.
7. Check the wheel alignment. Refer to Wheel Alignment Measurement (See: Alignment/Service and Repair/Wheel Alignment Measurement).
