Express 4500 V8-6.0L (2010)
2. Install the power brake booster outlet hose (1) to the power brake booster (2). Hand tighten the fitting.
3. Through the wheel well, connect the power brake booster outlet hose (1) to the steering gear (2) and tighten to 33 Nm (24 lb ft).
4. Lower the vehicle.
5. Tighten the power brake booster outlet hose fitting at the power brake booster to 34 Nm (25 lb ft).
6. If you removed the water deflector, install the water deflector to the fender.
7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
8. Remove the drain pans.
